Skip to main content

Skype for Business SDN API 2.4.1 installation and configuration Part 3


Skype for Business SDN API 2.4.1 installation and configuration Part 3

You can refer below article for SDN general information and installation, this article specifically target the SDN and LDL configuration.


Configure Skype for Business SDN manager:
SDN API 2.2 onwards you cannot modify the configuration for adding subscriber or changing any other configuration. You have to use command prompt or windows PowerShell to add / remove / modify any configuration.
Disable complication of Personal Identifiable Information (PII): Disable this in order to allow SIP address and LineURI etc. It is disabled by default after a new installation.

SDNManager.exe /p m hidepii=False
Add a subscriber to the Skype for Business SDN Manager
In the following steps, has to be used consistently. They are not interchangeable.
SDNManager.exe /p s submituri=http://:

e.g. sdnmanager.exe p s ArubaHQ1 submituri=http://10.XX.XX.XX:15790

sdnmanager.exe p s PrognosisHQ1 submituri=http://10.XX.XX.XX:3000/SdnApiReceiver/HQ1


Enable sending , and packets
SDNManager.exe /p s signaling=True
e.g SDNManager.exe /p s PrognosisHQ1 signaling=True


Enable Raw SDP. This is required by subscriber to filter out non-audio packets.
SDNManager.exe /p s sendrawsdp=True
e.g SDNManager.exe /p s PrognosisHQ1 sendrawsdp=True


Configure the output schema to be indistinguishable from SDN Manager 2.1, 2.1.1 and 2.2. Keeping schema as C as supported by Subscriber.
SDNManager.exe /p s outputschema=C
e.g SDNManager.exe /p s PrognosisHQ1 outputschema=C



Add a Dialog Listener (on Front-End server) to the SDN Manager:
This needs to be done for every single Skype for Business 2015 / Lync Server 2013 Pool. In case all Skype for Business Dialog Listeners belong to the same pool, it is only necessary to do this once.
SDNManager.exe /p l submituri="http://< SDN Manager IP>:9333/LDL;http://< SDN Manager IP>:9333/Log"

e.g. SDNManager.exe /p l csbrmpool.corp.brocade.com submituri="http:// 172.XX.XX.XX:9333/LDL;http:// 172.XX.XX.XX:9333/Log" sdn_conf10

Now restart SDN and LDL service and wait for 30 min to see real time call quality data on network management system or controller. In my setup I have configured two subscriber one is Aruba controller and another is Prognosis.

Thank you.

Comments

Popular posts from this blog

Outlook Add-in for Skype meeting getting disable after restarting Outlook.

Issue: Outlook Add-in for Lync meeting getting disable after restarting Outlook.
Problem Statement: Outlook Add-ins gets install automatically when Office 2013 installs (Lync and Skype for Business clients are part of Office package). Add-ins name is Lync Meeting Scheduling Outlook Addin or Skype meeting Add-in for Microsoft Office 2013. Sometime if other add-ins conflict with Outlook add-ins then outlook add-in keep getting disabled. And user has to enable it manually after Outlook restarts. 
Resolution: By default Lync Meeting Scheduling Outlook Addin or Skype Meeting Add-in for Microsoft Office 2013 installs wit load behavior "Load at Startup". However due to some conflict users Lync or Skype add-ins load behavior get changed to loaded instead of "Load at Startup" had to re-enable Lync Meeting Add-In in each time Outlook 2013 was started as it was not set to "Load at Startup". Look at the below screenshot. Now question is how we can change load behavior …

Unable to share desktop in Skype for Business?

Unable to share desktop in Skype for Business?
You can show your entire desktop or just a program to everyone in a Skype for Business Meeting, call, or instant messaging (IM) conversation. However sometime this feature does not work and give different errors.  Error message: ·Cannot start Desktop/Application Sharing due to network issues. ·An error occurred during the screen presentation. Resolution: There are multiple thing which may affect application/desktop sharing. 1.Make sure application / desktop sharing enabled on Skype for Business / Lync Server. SfB /Lync Control Panel > Conferencing > Conferencing policy > select Global or create new policy and set enable ‘Enable application and desktop sharing’. Refer below image. 2.Make sure your Skype for Business (Lync) client is updated with latest cumulative updates. Download latest update Skype (Lync) client. 3.Update your Video and Display drivers. a.Go to Start > Control panel. b.Search for Device Manager, and then open it. c.Find V…

Unable to login to Skype for Business client?

Unable to login to Skype for Business client? In order to sign-in on Skype (Lync) you must have login credential provided to you from your organization. ·Sign-in address: bilag@orgname.com ·User name: orgname\bilag ·Password: ************
Note: Orgname.com is my SIP domain name. Here are the most common mistake people make while sign-in on Skype for Business (Lync).
1.If you have login credential however still unable to sign-in then make sure you are putting proper login credential. Below error shows when you are wrong entering your sign-in address:
2.If you are writing correct Sign-in address however getting DNS error then contact administrator/ Support team there may be a DNS resolution or configuration issue. Administrator need to verify the SfB (Lync) AutoDiscover DNS records. 3.Sometime users password may expired/ lockout: Make sure that you password is not expire and lockout. If yes then call to helpdesk and reset your password / unlock. 4.Make user to have updated Skype for Business cli…